Overview

PBSC’s Ultrasonic Fogging Shower (also known as a mist shower) provides encapsulation or removal of powder from an operative’s suit and has been assessed by SafeBridge Consultants Inc.

The PBSC fogging shower cycle uses 5 to 10-micron water droplets to encapsulate API particles with minimal wetting through the operator’s PPE suit. Reductions in surface concentrations can be up to 800 times less than the starting contamination levels. Airborne particles around the operative and during de-gowning are also significantly reduced.

The decontamination fogging shower is supplied with a factory-tested PLC, controls and utility control panel. The control cabinets can be located above or next to the shower with a prewired cable for easy site electrical installation. All the parts on the shower are supplied on plugs to make replacement of spare parts quick and easy so in the unlikely event of component failure downtime is minimized.

The system is available with a range of PLCs, with standard options of a Siemens LOGO PLC (with the option of a remote ‘TDE’ PLC screen if required) or a Rockwell (Allen-Bradley) MLX1100 PLC with PanelView 800 HMI 4” colour touchscreen.

PLC comes with a touch screen in the shower (or on the PLC cabinet) to show the shower status, alarms can be seen and cleared from the screen and the screen allows various cycle recipes to be stored and accessed by the Supervisor Level password.

‍

Features

• SafeBridge Assessment on performance
• Efficient usage of water to minimise liquid waste
• Air and water pressures to the fogging nozzles are monitored by the PLC
• Frameless glass door sets
• All cycle stage timers are user adjustable
• PLC controlled LED light
• Emergency override buttons
• Large range of options available

‍

Technical Specification

• PBSC reserve the right to introduce changes in performance, configuration and technology, dimension, weights and materials in the course of technical progress. Images may not be accurate.
• Some of the information/images/equipment described or shown may only be available at extra cost. Features & specifications will vary. Please contact PBSC for specific design options.

Options

• Garment bag-out chutes
• Folding shelves
• Wash gun with hose
• Breathing air supply point
• Dosing pump - for chemical addition to fog water, with adjustable proportional dosing rate
• CIP System with 360 spray ball - operate automatically from PLC timer or manually
• Emergency deluge shower and/or eyewash station
• Rinse cycle (reusable garments only) - either from “Coarse” fog nozzles or water sprays
• Air shower cycle (after rinse cycle only)
• HEPA filter with coalescent pre-filter on HVAC exhaust from shower, with safe change option
• There are many more options - please download our datasheet for more details

‍